2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
7-95. INTERVEHICULAR CABLE REPAIR
This task covers:
a. Disassembly
c. Assembly
b. Cleaning/inspection
INITIAL SETUP
Tools and Special Tools
Materials/Parts
Tool Kit, Genl Mech (Item 54, Appendix F)
Silicone Spray (Item 30, Appendix C)
Tool Kit, Electrical Repair (Item 53,
Multimeter (Item 20, Appendix F)
a. Disassembly
(1) Remove clamp (1) from shell (2).
(2) Push 12 electrical contacts (3) into insert
(4) using insertion tool.
(3) Remove insert (4) from shell (2).
(4) Remove shell (2) from cable (5).
(5) Repeat steps (1) thru (4) for other end of
cable.
NOTE
Do steps (6) and (7) only if electrical
contact(s) are being replaced.
(6) Cut electrical contact (6) from wire (7).
Discard electrical contact.
(7) Remove 1/4 in.
(6.3 mm) of insulation
from wire (7).
b. Cleaning/Inspection
Check each of the 12 wires for continuity using a
multimeter. If any of the individual wires is
shorted or open, discard cable assembly.
Change 1 7-289
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |