 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
h. 22-Pin Connector Repair
(1) Loosen screw (1) and remove harness
connector (2) from cab connector (3).
NOTE
For access to wires on cab
connector, it may be necessary to do
step (2) to remove connector from
dash.
(2) Remove two locknuts (4), screws (5), and
cab connector (3) from cab (6). Discard
locknuts.
NOTE
Cab
connectors
and
harness
connectors are repaired the same
way. Harness connector is shown.
(3) Remove secondary
lock(s)
(7)
from
connector (3).
(4) Remove wire(s) (8) from connector (3)
with contact socket removal tool.
(5) Cut and remove cable seal (9) and
electrical contact (10) from wire(s) (8).
(6) Strip approximately 5/16 in. of insulation
(11) from end of wire (8).
(7) Install new cable seal (9) on wire (8).
(8) Crimp new electrical contact (10) on wire
(8).
(9) Install wi re (8) in connector (3) until it
locks.
7-287
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
