Installation - TM-9-2320-360-20-20484

TM 9-2320-360-20-2

7-89. STE-ICE TACHOMETER SENDING UNIT REPLACEMENT (CONT)

b. Installation

NOTE

Tabs on drive key and tachometer

cable must be aligned with slots in

sending unit and adapter for proper

installation.

(1) Install drive key (1) in sending unit (2).

(2) Install sending unit (2) on adapter (3) and

turn nut (4) clockwise to tighten.

(3) Install electrical connector (5) in electrical

connector (6).

NOTE

Plastic

cable

ties

should

positioned in locations marked

during removal.

(4) Secure wires (7 and 8) to wire harness (9)

with plastic cable ties (10).

(5) Install tachometer cable (11) on sending

unit

(2) and turn collar (12)

clockwise to tighten.

c. Follow-On Maintenance

(1) Start engine (TM 9-2320-360-10).

(2) Check tachometer operation (TM 9-2320-360-10).

(3) Shut off engine (TM 9-2320-360-10).

(4) Close engine hood (TM 9-2320-360-10).

(5) Remove wheel chocks.

7-270