 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
(3) Install two grommets (9) in box (4).
WARNING
Adhesive-sealant can burn easily,
can give off harmful vapors, and is
harmful to skin and clothing. To
avoid injury or death, keep away from
open fire and use in well ventilated
area. If adhesive-sealant gets on skin
or clothing, wash immediately with
soap and water.
(4) Coat grommets (9) and two cables (10
and 11) with silicone adhesive-sealant.
(5) Insert cable no. 1138 (10) and cable no.
1139 (11) in box (4).
(6) Install two cables (10 and 11) in
receptacle (3) with two new lockwashers
(12) and screws (13).
(6.1) Apply anticorrosion grease to electrical
connections on two cables (10 and 11).
(7) Install cover (14) on box (4) and tighten
four captive screws (15).
d. Installation
(1) Route negative (-) slave receptacle cable
no.
1138 (1) and positive (+) slave
receptacle cable no. 1139 (2) to starter
(3).
(2) Install slave receptac le box (4) on fender
(5) with four screws (6) and new locknuts
(7).
(3) Install two cushion clips (8 and 9) on
engine dipstick support (10) and slave
receptacle cables (1 and 2) with screw
(11) and new locknut (12).
Change 1 7-175
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
