 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-20-2
NOTE
Location of plastic cable ties should
be marked before removal.
(1) Remove plastic cable ties (11) from wire
harness (12) as required.
(2) Disconnect plug (1 3) from connector (14).
NOTE
Tag and mark wires before removal.
(3) Remove two screws (15), clips (16), and
harness (12) from rear mounting bracket
(8).
(4) Deleted.
(5) Remove two locknuts (22), wire clips (23),
screws (24), ground wire (19), and rear
mounting bracket (8) from rear cross-
member (21). Discard locknuts.
b. Installation
NOTE
To install lamp only, do steps (8) and
(9).
(1) Connect plug (1) to connector (2).
(2) Install two screws (3), ground wire (9),
wire clips (4), two new locknuts (5), and
rear mounting bracket (6) on rear cross-
member (7).
(3) Deleted.
(4) Install harness (12), two clips (13), and
screws (14) on rear mounting bracket (6).
NOTE
Plastic
cable
ties
should
be
positioned in
locations marked
during removal.
(5) Secure wire harness (12) with plastic
cable ties (15).
Change 1 7-129
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
|
|
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
|
Click
here for thousands of PDF manuals
