2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
7-44. REAR MARKER LIGHT AND MOUNTING BRACKET REPLACEMENT
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut off (TM 9-2320-360-10).
Tags, Identification (Item 32, Appendix C)
Parking brake on (TM 9-2320-360-10).
Locknuts (2) (Item 58, Appendix G)
Wheels chocked.
Locknut (Item 72, Appendix G)
Gasket (Item 38.1, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 54, Appendix F)
a. Removal
NOTE
All rear marker lights are replaced
in a similar way.
To remove lamp only, do steps (1)
and (2).
(1) Remove two screws (1), lens (2), and lens
holder (3) from base (4).
(2) Remove lamp (5) from socket (6).
(3) Remove two screws (7), base (4), and
gasket (7.1) from rear mounting bracket
(8). Discard gasket.
(4) Disconnect plug (9) from connector (10).
7-128 Change 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |