Cleaning/Inspection - TM-9-2320-360-20-20227

TM 9-2320-360-20-2

(6) Disconnect electrical connector (29) from

STE/ICE oil temperature sensor (30).

(7) Move electrical connector (29) from behind

starter (15).

WARNING

Starter weighs 72 lb (33 kg) and Is

difficult to handle. To prevent Injury,

use caution when removing.

(8) Position suitable lifting device around starter

(15).

(9) Remove three screws (31) and lockwashers (32)

from flywheel housing (33) while assistant

supports starter (15). Discard lockwashers.

(10) Remove starter (15) from flywheel housing (33)

by pulling it forward. Use suitable lifting device

to lower starter through engine compartment to

ground.

NOTE

Gasket may stay on flywheel housing.

(11) Remove gasket (34) from starter (15). Discard

gasket.

b. Cleaning/Inspection

Inspect engine flywheel (1) for worn, broken, or

missing teeth.

7-27