 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
4-5. DIFFERENTIAL (CONT)
STEP
LOCATION
ITEM
ACTION
REMARKS
CLEANING (cont)
17
b. Differential
Clean
Use clean cloths moistened
(cont)
carrier
with dry cleaning solvent
housing (1)
P-D-680. Dry with compressed
and helical
air
spur gear (11)
c. All other parts
Clean
Use cleaning solvent P-D-680.
Immerse in solvent and move
up and down to remove all
old lubricant and dirt.
Dry with clean, soft, lint-
less, absorbent cloths or
with compressed air. Don't
use compressed air on any
INSPECTION
18
a. Bearings (20,
Inspect
Check for wear, pitting, or
31, 34, 45,
damage; replace part if any
and 47),
of these conditions are
bearing cups
observed. See steps 3, 5h-i,
(8, 32, 33,
6b, and 11 through 13
48, and 53)
b. Drive pinion
Inspect
Check gear teeth and splines
(28)
for nicked, cracked, broken,
scored, or worn condition.
Remove burrs or nicks with
soft hone or crocus cloth.
Replace badly damaged or
worn part
NOTE
Drive pinion (28) and drive gear (40) must be replaced as a matched set.
c. Two adjusting
Inspect
Check for wear, damage and
nuts (7)
nicks. Check threads for
damage. If any of these con-
ditions are observed, re-
place part
4-154
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals