DISASSEMBLY (cont) - TM-9-2320-285-24-20634

TM 9-2320-285-24-2

4-5. DIFFERENTIAL (CONT)

STEP

LOCATION

ITEM

ACTION

REMARKS

DISASSEMBLY (cont)

b. Front cover

Remove

Discard gasket

(cont)

(57) and

gasket (60)

Differen-

Fill plug (61)

Remove

Remove only if necessary

tial

carrier

housing (1)

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and gloves and

use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe vapors. Do not use

near open flame or excessive heat and don't smoke when using it. Failure to do so could cause serious injury. If

you become dizzy while using cleaning solvent, get fresh air immediately, and get medical attention. If contact with

skin or clothes is made, flush with large amounts of water. If contact with eyes is made, wash eyes with water

immediately, and obtain medical aid immediately.

Compressed air must not exceed 30 psi. Wear safety glasses when drying parts with compressed air. Failure to do

so could cause serious injury to eyes and possible blindness. If you hurt your eyes or if a foreign object is blown into

your eyes, seek medical attention immediately.

Clean

Use cleaning solvent P-D-680.

and 45)

Soak in cleaning solvent;

then remove and strike flat

of bearing against block of

wood to dislodge solidified

lubricant particles. Dry

with clean, soft, lintless,

absorbent cloths. Don't use

compressed air to dry

4-153