 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
4-5.
DIFFERENTIAL
This task covers:
a. Disassembly
d.
Reassembly
b. Cleaning
e.
Adjustment
c. Inspection
INITIAL SETUP
Tools
Materials/Parts
Automotive Mechanic's Tool Kit
Cleaning solvent
Item 1, Appendix C
Diagonal cutting pliers
Clean cloths
Item 2, Appendix C
Center punch
Chassis grease
Item 3, Appendix C
Socket wrench set, 1/2 inch drive
Emery cloth
Item 4, Appendix C
No. 1 Common Organizational Maintenance
Soft lock wire
Item 5, Appendix C
Tool Kit
Axle lubricant
Item 6, Appendix C
Twist drill set
Light machine
Socket wrench set, 3/4 inch drive
oil
Item 7, Appendix C
Fixed open end wrench set
Linseed oil
Item 46, Appendix C
Safety glasses
Red lead
Item 47, Appendix C
Torque wrench, 1/2 inch drive,
Cotter pins
FSCM 78500 PN 1199R2176
175 pounds foot capacity
Oil seal
FSCM 78500 PN A1805S149
Torque wrench, 3/4 inch drive,
Gasket
FSCM 78500 PN 2808Z728
600 pounds foot capacity
Mechanical puller kit
Personnel Required
No. 2 Common Organizational Maintenance
Two Automotive Repairers MOS 63H
Tool Kit
Hand hammer
Equipment Condition
Flat tip screwdriver
Paragraph
Condition Description
Socket wrench handle, 1/2 inch drive
Electric portable drill, 1/2 inch
3-19b
Differential removed from
Pry bars (2)
axle and mounted in repair
Dial indicator
stand.
Arbor press
Differential repair stand
FSCM 78500 PN 3-11546
Yoke holding tool
STEP
LOCATION
ITEM
ACTION
REMARKS
DISASSEMBLY
1
Differen-
a. Differential
Mark
Use center punch and hammer to
tial
bearing cap
identify one differential
carrier
(2)
bearing cap (2) and differ-
housing (1)
tial carrier housing (1) for
proper reassembly
b. Two tacks (3)
Remove
Only if necessary for
replacement
c.
Plate (4)
Remove
4-147
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals