DISASSEMBLY (cont) - TM-9-2320-285-24-20606

TM 9-2320-285-24-2

4-4.

TRANSMISSION (CONT)

k. Governor and Rear Cover Assembly (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

DISASSEMBLY (cont)

Plug (26)

Remove

(cont)

m. Governor filter

Remove

Discard

(27)

n. O-ring seal

Remove

Discard

(28)

o. Outer race (29)

Remove

Only if inspection shows re-

placement is necessary. Use

mechanical puller kit

Pin (30)

Remove

Only if inspection shows re-

placement is necessary

Drain tube (31)

Remove

Only if inspection shows re-

placement is necessary

Plug (32)

Remove

Only if inspection shows re-

placement is necessary

Governor

Two governor

Remove

Only if governor service kit,

assembly (5)

weight pins (33)

consisting of two governor

weight pins (33) and gover-

nor cover gasket (4) is

available. Follow directions

in governor service kit for

disassembly of governor

assembly (5)

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and

gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe

vapors. Do not use near open flame or excessive heat and don't smoke when using it. Failure to do so

could cause serious injury. If you become dizzy while using cleaning solvent, get fresh air immediately,

and get medical attention. If contact with skin or clothes is made, flush with large amounts of water. If

contact with eyes is made, wash eyes with water immediately, and obtain medical aid immediately.

4-125