CLEANING (cont) - TM-9-2320-285-24-20581

TM 9-2320-285-24-2

4-4. TRANSMISSION (CONT)

i. Low Shift Valve Assembly (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

CLEANING (cont)

WARNING

Compressed air must not exceed 30 psi. Wear safety glasses when drying parts with compressed air.

Failure to do so could cause serious injury to eyes and possible blindness. If you hurt your eyes or if a

foreign object is blown into your eyes, seek medical attention immediately.

All parts

Clean

Use cleaning solvent P-D-680.

Immerse parts in solvent and

move up and down to

remove

all dirt, grease, and old

lubricant. Dry thoroughly

using clean cloths or

moisture-free compressed

air

INSPECTION

Valve body (13)

Inspect

Inspect oil passages and valve

bore for cleanliness If not

perfectly clean, reclean.

Inspect for burrs Deburr

with crocus cloth if neces-

sary Inspect valve bores

for cracks, wear, damage

and

distortion Replace if

necessary

Valves (17 and

Inspect

Inspect for wear, damage and

21)

distortion; if any of these

conditions are observed,

replace valve

Springs (16 and

Inspect

Replace if cracked, worn,

20)

distorted, broken or per-

manently set

All other parts

Inspect

Inspect for wear, damage,

cracks, and distortion;

replace part if any of these

conditions are observed

4-100