DISASSEMBLY - TM-9-2320-285-24-20580

TM 9-2320-285-24-2

4-4. TRANSMISSION (CONT)

i. Low Shift Valve Assembly (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

DISASSEMBLY

NOTE

Before disassembly, note position of stop adjusting ring (11) in relation to retainer pin (12). During

reassembly, stop adjusting ring (11) must be installed in same position, or transmission will not operate

properly.

Valve

Retainer pin

Remove

Depress stop adjusting ring

body (13)

(12)

(11)

Stop adjusting

Remove

ring (11),

washer (14),

valve stop

(15), and

spring (16)

Valve (17)

Remove

Retainer pin

Remove

Depress valve stop (19)

(18)

Valve stop

Remove

(19) and

spring (20)

Valve (21)

Remove

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and

gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe

vapors. Do not use near open flame or excessive heat and don't smoke when using it. Failure to do so

could cause serious injury. If you become dizzy while using cleaning solvent, get fresh air immediately,

and get medical attention. If contact with skin or clothes is made, flush with large amounts of water. If

contact with eyes is made, wash eyes with water immediately, and obtain medical aid immediately.

4-99