 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
4-4. TRANSMISSION (CONT)
h. Modulated Lockup Valve Assembly (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
INSPECTION
4
a
Valve body (5)
Inspect
Inspect oil passages and
valve bore for cleanliness.
If not perfectly clean,
reclean Inspect for burrs.
Deburr with crocus cloth if
necessary Inspect valve
bore for cracks, wear,
damage and distortion.
Replace if necessary
b
Valve (8)
Inspect
Inspect for wear, damage and
distortion; if any of these
conditions are observed,
replace valve
c
Spring (7)
Inspect
Replace if cracked, worn,
distorted, broken or per-
manently set
d
All other parts
Inspect
Inspect for wear, damage,
cracks, and distortion; re-
place part if any of these
conditions are observed
REASSEMBLY
5
Valve body
a
Valve (8)
Install
Smaller diameter first
(5)
b
Spring (7)
Install
c
Stop (6)
Install
Undrilled end first
d
Ring (3)
Position
e
Pin (4)
Install
Depress ring (3) Pin (4) must
go through stop (6) and
retain ring (3) Be sure
that ring (3) is in same
position as before disassem-
bly Use valve body
adjusting ring tool, if
necessary
INSTALLATION
6
Transmis-
a
Modulated
Position
sion
lockup valve
assembly (2)
b
Three capscrews
Install
Tighten to 9-11 pounds foot
(1)
4-96
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals