DISASSEMBLY (cont) - TM-9-2320-285-24-20576

TM 9-2320-285-24-2

4-4. TRANSMISSION (CONT)

h. Modulated Lockup Valve Assembly (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

DISASSEMBLY (cont)

Ring (3), stop

Remove

(cont)

(6), and

spring (7)

Valve (8)

Remove

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and

gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe

vapors. Do not use near open flame or excessive heat and don't smoke when using it. Failure to do so

could cause serious injury. If you become dizzy while using clean- ing solvent, get fresh air immediately,

and get medical attention. If contact with skin or clothes is made, flush with large amounts of water. If

contact with eyes is made, wash eyes with water immediately, and obtain medical aid immediately.

Compressed air must not exceed 30 psi. Wear safety glasses when drying parts with compressed air.

Failure to do so could cause serious injury to eyes and possible blindness. If you hurt your eyes or if a

foreign object is blown into your eyes, seek medical attention immediately.

All parts

Clean

Use cleaning solvent P-D-680.

Immerse parts in solvent

and move up and down to

remove all dirt, grease, and

old lubricant. Dry thor-

oughly using clean, dry,

lintless cloths or moisture-

free compressed air

4-95