 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
4-4. TRANSMISSION (CONT )
g. Low Planetary, Low Clutch, and Adapter Housing Assemblies (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
If old bushing (20) was removed. Use
REASSEMBLY (cont)
low planetary bushing installer to press
bushing (20) into carrier and bushing
15
g.
New bushing
Install
assembly (19) to dimension shown
(cont)
(20)
h.
Bushing (20)
Bore
Use lathe to bore bushing (20)
to diameter shown, step 15g.
Bushing bore must be square
with surface of carrier and
bushing assembly (19) within
0.001 inch
16
First
a.
New lip type
Install
Lubricate with oil-soluble
clutch
seal ring
grease. Be sure .lip fa ces
piston
(31)
fluid pressure side of first
(29)
clutch piston (29)
b.
New lip type
Install
Lubricate with oil-soluble
seal ring
grease. Be sure lip faces
(30)
fluid pressure side of
first clutch piston (29)
17
Adapter
a.
Plug (18)
Install
Tight enough to prevent leaks
housing (9)
b.
First clutch
Install
Aline lug on first clutch
piston (29)
piston (29) with recess in
adapter housing (9). Be sure
not to distort lip type seal
rings (30 and 31)
4-87
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals