|
|
TM 9-2320-285-24-2
4-4. TRANSMISSION (CONT)
g. Low Planetary, Low Clutch, and Adapter Housing Assemblies (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
DISASSEMBLY (cont)
11
f.
First clutch
Remove
(cont)
piston (29)
12
First
a.
Lip type seal
Remove
Discard
clutch
ring (30)
piston
b.
Lip type seal
Remove
Discard
(29)
ring (31)
CLEANING
WARNING
Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and gloves and
use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe vapors. Do not use
near open flame or excessive heat and don't smoke when using it. Failure to do so could cause serious injury. If
you become dizzy while using cleaning solvent, get fresh air immediately, and get medical attention. If contact with
skin or clothes is made, flush with large amounts of water. If contact with eyes is made, wash eyes with water
immediately, and obtain medical aid immediately.
Compressed air must not exceed 30 psi. Wear safety glasses when drying parts with compressed air. Failure to do
so could cause serious injury to eyes and possible blindness. If you hurt your eyes or if a foreign object is blown into
your eyes, seek medical attention immediately.
13
a.
All parts,
Clean
Use cleaning solvent P-D-680.
except
Immerse in solvent and move
adapter
up and down to remove all
housing (9)
dirt and old lubricant. Dry
thoroughly with compressed
air or with clean, dry,
lintless cloths
4-83
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |