 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
4-4. TRANSMISSION (CONT)
c. Forward Clutch and Shaft Assembly (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY
7
Turbine
a. Centrifugal
Install
Conical end first
shaft and
valve (28)
clutch
b. Valve spring
Position
housing
(27) and
assembly
valve plug
(17)
(26)
c. Pin (25)
Install
Depress valve plug (26)
d. Two new check
Install
Position turbine shaft and
balls (24)
clutch housing assembly (17)
with shaft downward through
hole in work table. Install
new check balls (24) if old
check balls were removed.
Place check balls in bores.
Stake each bore at three
equally spaced places. Check
balls must move when
installed
e. New lip type
Install
Lubricate with automatic
ring (23)
transmission fluid. Install
so that lip faces fluid
pressure side of forward
clutch piston (21)
8
Forward
New lip type
Install
Lubricate with transmission
clutch
ring (22)
fluid. Install so that lip
piston (21)
faces fluid pressure side
of forward clutch piston
(21)
9
Turbine
a. Forward clutch
Install
Be sure not to distort lip
shaft and
piston (21)
type rings (22 and 23)
clutch
b. Five forward
Install
Soak all forward clutch discs
housing
clutch plates
(15) in automatic trans-
assembly
(16) and five
mission fluid for at least
(17)
new forward
two minutes before installa-
clutch discs
tion. Install all forward
(15)
clutch discs and plates (15
and 16) alternately, as
shown in exploded view
c. Hub (10)
Install
d. Internal snap
Install
ring (9)
4-46
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals