 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-2
3-28.
STEERING SYSTEM MAINTENANCE (CONT)
d. Power Steering Gear (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (cont)
14
g
Seal ring (5)
Install
Coat with clean grease, and
(cont)
press into side cover
groove
15
Sector
a
Sector shaft
Position and
Clamp serrated end in soft-
shaft (2)
(2)
clamp
jawed vise so that gear end
faces upward
b
Adjusting screw
Install
Coat screw head with wheel
(15)
bearing grease and press
into bore at gear end of
sector shaft
c
Retainer (23)
Install
Slide over adjusting screw
(15) and thread into sector
shaft until adjusting screw
has no end play. Then stake
retainer to sector shaft at
the two slots provided
d
Sector shaft
Position
Coat the adjusting screw end
(2)
of sector shaft (2) with
clean grease, and slide in-
to side cover (4) until ad-
justing screw (15) contacts
side cover
e
Adjusting screw
Turn counter-
Use a screwdriver to turn ad-
(15)
clockwise
justing screw until threads
engage. Continue turning
adjusting screw until firm
resistance is felt
f
Nut (14)
Install
Tighten hand tight only
16
Housing
a
Retaining ring
Install
On bearing (33) using retain-
(11)
(34)
ing ring pliers
b
Bearing (33)
Install
Position housing (11) on
wooden block to protect
side cover face. Press
bearing (33) into bore' of
housing until retaining
ring (34) contacts housing
c
Back-up washer
Install
On non-threaded end of ad-
(31)
justing screw (30)
d
O-ring (32)
Install
Thoroughly coat with clean
grease and install against
back-up washer (31)
3-271
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals