|
|
TM 9-2320-285-24-2
3-17. TRANSMISSION MAINTENANCE (CONT)
f. Transmission Mount.
This task covers:
a. Removal
c. Inspection/Repair
b. Cleaning
d. Installation
INITIAL SETUP
Tools
Personnel Required
No. 1 Common Organizational Maintenance
Two Automotive Repairers MOS 63H
Tool Kit
Scratch wire brush
Equipment Condition
Adjustable open end wrench
Paragraph
Condition Description
Combination wrench set
Safety glasses
Parked on level surface, engine
Hoist
off, and parking brake applied.
Sling
2-65c
Rear platform removed.
2-29
Water level sensor and bracket
Materials/Parts
removed.
Cleaning solvent
Item 1, Appendix C
Clean cloths
Item 2, Appendix C
Detergent
Item 27, Appendix C
STEP
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
1
Trans-
Hoist and sling
Attach
To rear of transmission
mission
housing as shown. Apply
housing
sufficient lifting force to
relieve stress on trans-
mission housing and engine
flywheel housing when
transmission mount is
removed
3-125
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |