CLEANING - TM-9-2320-285-24-20030

TM 9-2320-285-24-2

3-5.

COOLING SYSTEM MAINTENANCE (CONT)

b. Fan Shroud (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective

goggles and gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and

clothes and don't breathe vapors. Do not use near open flame or excessive heat and don't smoke

when using it. Failure to do so could cause serious injury. If you become dizzy while using

cleaning solvent, get fresh air and medical attention immediately. If contact with skin or clothes is

made, flush with large amounts of water. If contact with eyes is made, wash eyes with water and

seek medical aid immediately.

Fan shroud

Clean

Use cleaning solvent P-D-680;

use wire brush to remove

corrosion. Dry using com-

pressed air

INSPECTION/REPAIR

Fan shroud

Inspect for

Repair cracked or broken

cracks

welds by grinding off old

breaks

welds, pounding out dents

dents

using hammer and wooden

backing block, and

rewelding seams

INSTALLATION

Front of

Fan shroud

Position

Use two men and chain hoist;

vehicle

move fan shroud under cab

and lower in position

against radiator

Fan shroud

Install and

Para 3-5a

attaching tighten

hardware

Fan

Alcohol evaporator

Install

Para 2-52c

shroud,

right side

3-24