REMOVAL - TM-9-2320-285-24-10953

TM 9-2320-285-24-1

2-87.

PRESSURE GAGES MAINTENANCE

FUEL Gage (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

REMOVAL

Instrument

a. Two nuts (1)Remove

panel,

and lock

underside

washers (2)

b. Bracket (3)

Remove

Instrument

Fuel gage (4)

Remove

Lift from instrument panel

panel, top

CLEANING

a. Fuel gage (4)

Clean

Wipe with clean, dry cloth

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective

goggles and gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and

clothes and don't breathe vapors. Do not use near open flame or excessive heat and don't

smoke when using it. Failure to do so could cause serious injury. If you become dizzy while

using cleaning solvent, get fresh air and medical attention immediately. If contact with skin or

clothes is made, flush with large amounts of water. If contact with eyes is made, wash eyes

with water and seek medical aid immediately.

b. All other parts

Clean

Use cleaning solvent P-D-680;

dry with clean cloths

INSPECTION

a. Fuel gage (4)

Inspect

Replace if cracked, broken,

or inoperative.

electri-

cal contacts dirty or dis-

colored, polish to bright-

ness with fine sandpaper

b. All other parts

Inspect

Replace if cracked, broken,

or threads damaged

2-930