CLEANING - TM-9-2320-285-24-10769

TM 9-2320-285-24-1

2-65. BODY AND CAB MAINTENANCE (CONT)

k. Cab Pivot Pins and Bushings (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and

gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe

vapors. Do not use near open flame or excessive heat and don't smoke when using it. Failure to do so

could cause serious injury. If you become dizzy while using cleaning solvent, get fresh air and medical

attention immediately. If contact with skin or clothes is made, flush with large amounts of water. If contact

with eyes is made, wash eyes with water and seek medical aid immediately.

Compressed air must not exceed 30 psi. Wear safety glasses when drying parts with compressed air.

Failure to do so could cause serious injury to eyes and possible blindness. If you hurt your eyes or if a

foreign object is blown into your eyes, seek medical attention immediately.

All parts

Clean

Use cleaning solvent P-D-680;

dry using compressed air

INSPECTION

All parts

Inspect for:

Replace if defective

thread

damage

distortion

deformation

INSTALLATION/REPLACEMENT

WARNING

Be sure cab and deck are securely blocked before performing the following step. Failure to do so could

cause death or serious injury due to cab and deck falling on you. If you are injured by falling equipment,

obtain medical aid immediately.

2-746