 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-1
2-45.
BODY AND CAB MAINTENANCE (CONT)
d.
Rear Cab Guard and Heat Shield (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
CLEANING (cont)
WARNING
Compressed air must not exceed 30 psi. Wear safety glasses when drying parts with
compressed air. Failure to do so could cause serious injury to eyes and possible blindness.
If you hurt your eyes or if a foreign object is blown into your eyes, seek medical attention
immediately.
5
All parts
Clean
Use cleaning solvent P-D-680;
dry using compressed air
INSPECTION/REPAIR
6
a. Shims (6, 7, 8,
Inspect for:
Replace if defects are
and 9) and
cracks
observed
heat shield
dents
(13)
bent
condition
b. Rear cab guard
Inspect for:
Repair broken welds by
(5)
broken
welding; replace if other
welds
defects are observed
cracks
breaks
bent
condition
c. All other parts
Inspect for:
Replace if any defects are
deformation
observed
damaged
threads
INSTALLATION
7
Frame, left
a. Heat shield
Position
On frame
side, near
(13)
b. Two capscrews
Install and
manifold
(11), lock
tighten
washers (12)
and nuts (10)
8
Cab tilt
Cab
Lower
To normal operating position
pump
2-712
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals