REMOVAL (cont) - TM-9-2320-285-24-10716

TM 9-2320-285-24-1

2-63. FRAME AND TOWING ATTACHMENTS MAINTENANCE (CONT)

Boom Platform and Latch Assembly (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

REMOVAL (cont)

Two pivot

Remove

(cont)

brackets (11)

CLEANING

a. Latches (8)

Clean

Use clean cloth moistened

with detergent. Rinse with

clear water and dry with

clean cloths

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a well

ventilated area. Avoid contact with skin, eyes, and clothes and don't

breathe vapors. Do not use near open flame or excessive heat and don't

smoke when using it. Failure to do so could cause serious injury. If you

become dizzy while using cleaning solvent, get fresh air and medical

attention immediately. If contact with skin or clothes is made, flush with

large amounts of water. If contact with eyes is made, wash eyes with

water and seek medical aid immediately.

Compressed air must not exceed 30 psi. Wear safety glasses when

drying parts with compressed air. Failure to do so could cause serious

injury to eyes and possible blindness. If you hurt your eyes or if a foreign

object is blown into your eyes, seek medical attention immediately.

b. All other

Clean

Use cleaning solvent P-D-680;

parts

dry using compressed air

INSPECTION

a. Boom platform

Inspect for:

Repair broken welds by weld-

(1)

broken welds

ing; replace if other

cracks

defects observed

breaks

b. Latch brackets

Inspect for:

Replace if necessary

(4) and

cracks

pivot brack-

breaks

ets (11)

2-693