 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-1
2-44. REAR AXLE MAINTENANCE (CONT)
b. Axle Shafts, Hubs, and Drums (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
INSPECTION (cont)
5
b. Axle shaft (4)
Inspect
Replace if bent, twisted,
(cont)
splines worn or damaged, or
flange distorted
c. Brake drum (10)
Inspect
Replace if worn, scored, or
cracked
d. Hub (9)
Inspect
Replace if cracked; be sure
all grease and dirt is
removed from inside hub
e. All other parts
Inspect
Replace if damaged, bent,
distorted, or threads
damaged
REASSEMBLY/INSTALLATION
6
Axle hous-
a. Axle housing
Seal
Apply bead of non-hardening
ing end
end, seal
sealant around edge of seal
area
area
b. Wear ring (19)
Install
7
Hub (9)
a. Brake drum (10)
Position, if
Against hub (9), with holes
necessary
aligned
b. 10 studs (17)
Install, if
Press in
necessary
c. Inner cup (15)
Install
Use brass drift
d. Outer cup (16)
Install
Use brass drift
e. Eight studs
Install, if
Screw in
(18)
necessary
f. Inner cone (14)
a. Lubricate
Refer to current lubrication
order
b. Position
In inner cup (15)
g. Steel retainer
a. Seal
Apply bead of non-hardening
(13)
sealant to outer diameter
b. Install
h. Oil seal (12)
a. Install
In steel retainer (13)
b. Lubricate
Seal lip
8
Rear axle,
a. Hub (9) with
Install
Carefully, to prevent damage
left side
drum (10)
to oil seal (12)
b. Outer cone (11)
a. Lubricate
Refer to current lubrication
order
b. Position
In outer cup (16)
2-516
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals