 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-285-24-1
2-41. TRANSMISSION MAINTENANCE (CONT)
g.
Gear Shift Control (cont).
(1) Gear Shift Control Lever and Cable (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (cont)
14
d. Selector lever
Grasp
Grasp lever at end and pull
(cont)
(6)
away from transmission;
keep tension on lever until
nut (5) is fully installed
e. Nut (5)
Tighten
To 17 pounds foot torque
15
Left hand
a. Bracket (13)
Position
transmis-
b. Two capscrews
Install and
sion mount
(11) and lock
tighten
washers (12)
c. Shim (10) and
Position
At bracket (13)
cable (27)
d. U-bolt (9)
Position
Around cable (27), through
shim (10) and bracket (13)
e. Two lock wash-
Install
Do not tighten nuts
ers (8) and
nuts (7)
16
Cab tilt
Cab
Lower
To normal operating position
pump
17
Transmis-
a. Trunnion (2)
Assemble
sion, left
and adapter
hand side
(3)
b. Nut (4)
Install
On cable (27) shaft
c. Trunnion (2)
Install
On cable (27) shaft; center
and adapter
trunnion on threaded end of
(3)
cable
d. Trunnion (2)
Position
In selector lever (6) hole
e. New cotter pin
Install
In trunnion (2); do not
(1)
spread
f. Selector lever
Rotate
To neutral (N) position
(6)
g. Shift lever
Position
In neutral (N) position
(41)
h. Two nuts (7)
Tighten
Centers adjustment range
ADJUSTMENT
18
Cab
Shift lever (41)
a. Check op-
Shift lever should move easi-
interior
eration
ly and give a crisp detent
feel in each position
2-461
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals