|
|
TM 9-2320-285-24-1
2-41. TRANSMISSION MAINTENANCE (CONT)
g.
Gear Shift Control (cont).
(1) Gear Shift Control Lever and Cable (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (cont)
10
1. Two socket head Install
(cont)
capscrews
(38) and
locknuts (39)
m. Label (31)
Position
In cover (30)
n. Two clip nuts
Install
(32)
INSTALLATION
11
Cab
a. Gear shift con-
Install
Through opening in control
interior
trol assembly
mounting plate
b. New electrical
a. Install,
Strip 1/2-inch insulation
connector
if nec-
from two leads (49), twist
(34)
essary
leads together, and crimp
to connector (34) securely
b. Connect
Push connector with two leads
into connector housing (33)
c.
Four nuts (35),
Install and
lock washers
tighten
(36), and
screws (37)
d. Cover (30)
Position
e. Four screws
Install
Tighten to 10 pounds inch
(29)
f. Knob (28)
Install
12
Cab,
a. Cable (27)
Position
underside
b. Pivot (26)
Install
On cable (27), if removed
c. Setscrew (25)
Install, if
Tighten to 33 pounds inch
removed
d. Cable (27)
Lubricate
Lubricate both ends with
grease
e. Shift lever
Move
Use movement to engage pivot
(41) and
(26) through slot in side
cable (27)
of housing (46) and into
correct lever hole
f. Two screws (43)
Tighten
To 90 pounds inch torque
g. Two screws (22)
Install
Through hanger plate (45) so
that screw (22) centers are
at line "4" on hanger plate
h. Spacer (24)
Position
On screws (22)
2-459
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |