|
|
TM 9-2320-285-24-1
2-41. TRANSMISSION MAINTENANCE (CONT)
g. Gear Shift Control.
(1) Gear Shift Control Lever and Cable.
STEP
LOCATION
ITEM
ACTION
REMARKS
REMOVAL (cont)
4
Cab,
a. Three tie
Cut, remove,
From protective hose (16);
underside
straps (15)
and discard
note locations for instal-
lation
b. Protective hose
Remove
From gear shift and fifth
(16)
wheel cables
c. Nut (17) and
Remove
clamp (18)
d. Tie straps
Cut, remove,
Note locations for installa-
(19 and 20)
and discard
tion
e. Two nuts (21),
Remove
screws (22),
clamp (23),
and spacer
(24)
f. Two screws (43)
Loosen
g. Shift lever
Move
Use movement to disengage
(41) and
pivot (26) and move through
cable (27)
slot in side of rear
housing (46)
h. Setscrew (25)
Loosen
Remove only if necessary for
replacement of pivot (26)
or cable (27)
i. Pivot (26)
Remove
From cable (27)
j. Cable (27)
Remove
From tractor
5
Cab
a. Knob (28)
Remove
Rotate counterclockwise and
interior
pull up and off
b. Four screws
Remove
(29), cover
(30), label
(31), and two
clip nuts
(32)
c. Connector
Disconnect
Unplug from wiring harness
housing (33)
connector
d. Electrical con-
a. Disconnect
Pull two electrical leads
nector (34)
(49) with connector (34)
from connector housing (33)
b. Remove and
Only if inspection indicates
discard
need for replacement. Cut
two leads as close to con-
nector as possible
2-455
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |