REMOVAL (cont) - TM-9-2320-285-24-10391

TM 9-2320-285-24-1

2-33.

HORN SYSTEM MAINTENANCE

Horn and Relay (cont).

STEP

LOCATION

ITEM

ACTION

REMARKS

REMOVAL (cont)

Front frame

a. Electrical lead

Disconnect

Unplug from horn (17)

crossmember

(5)

and remove

b. Capscrew (12),

Remove

Support horn and bracket

nut (13),

and

assembly

lock washer

(14)

c. Nut (15) and

Remove

From horn (17)

bracket (16)

CLEANING

a. Electrical

Clean

Wipe with clean, dry cloth

leads

(5 thru 7)

and relay (8)

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective

goggles and gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and

clothes and don't breathe vapors. Do not use near open flame or excessive heat and don't

smoke when using it. Failure to do so could cause serious injury. If you become dizzy while

using cleaning solvent, get fresh air and medical attention immediately. If contact with skin or

clothes is made, flush with large amounts of water. If contact with eyes is made, wash eyes

with water and seek medical aid immediately.

b. Horn (17)

Clean

Wipe exterior with clean

cloth moistened with

cleaning solvent P-D-680;

dry with clean cloth

All other metal

Clean

Use cleaning solvent P-D-680;

parts

dry with clean cloths

2-368