CLEANING - TM-9-2320-285-24-10334

TM 9-2320-285-24-1

2-30. 24V INVERTER MAINTENANCE (CONT)

STEP

LOCATION

ITEM

ACTION

REMARKS

CLEANING

a. Circuit break-

Clean

Wipe with clean, dry cloth

ers (12), 7-

only

wire cables

(29 and 32),

(20 and 27),

and inverter

(7) exterior

b. Boot (16),

Clean

Use clean cloth moistened

cover (34),

with mild detergent; dry

and plastic

using clean cloths

tubing

(23 and 30)

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and

gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe

vapors. Do not use near open flame or excessive heat and don't smoke when using it. Failure to do so

could cause serious injury. If you become dizzy while using cleaning solvent, get fresh air and medical

attention immediately. If contact with skin or clothes is made, flush with large amounts of water. If contact

with eyes is made, wash eyes with water and seek medical aid immediately.

Compressed air must not exceed 30 psi. Wear safety glasses when drying parts with compressed air.

Failure to do so could cause serious injury to eyes and possible blindness. If you hurt your eyes or if a

foreign object is blown into your eyes, seek medical attention immediately.

c. All remaining

Clean

Use cleaning solvent P-D-680;

metal parts

dry thoroughly using com-

pressed air

2-311