|
|
TM 9-2320-285-24-1
2-15.
COOLING SYSTEM MAINTENANCE (CONT)
a.
Radiator (cont).
(1)
Servicing (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
COOLANT LEVEL CHECK (cont)
2
CAUTION
(cont)
If coolant is hot do not add coolant to radiator unless engine is running. Allow engine to run
for several minutes to enable coolant being added to mix and circulate. Failure to observe
this precaution may cause engine damage.
c. Radiator
Fill
Use solution of 50 percent
water and 50 percent
ethylene glycol. Fill to
two inches below level of
radiator cap opening
d. Radiator cap
Install
Rotate fully clockwise
e. Radiator access
Close and
panel
latch
f. Hood
Close
DRAINING RADIATOR
WARNING
Allow radiator and cooling system to cool prior to draining coolant. Hot coolant can cause
scalding and severe burns. If you are injured, obtain medical aid immediately.
3
Cab
a. Hood
Raise
b. Radiator access
Raise
panel
WARNING
Remove radiator cap slowly to relieve pressure before completely removing when engine is
hot. Failure to do so could cause severe injury. If you are scalded by steam, obtain medical
attention immediately.
2-127
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |