|
|
TM 9-2320-285-24-1
2-12. ENGINE MAINTENANCE (CONT)
f. Engine Oil Sampling Valve.
This task covers:
a. Oil sampling
c. Cleaning
b. Removal
d. Inspection
e. Installation
INITIAL SETUP:
Tools
Personnel Required
No. 1 Common Organizational Maintenance
Wheel Vehicle Mechanic MOS 63B
Tool Kit
Safety glasses
Equipment Condition
Socket wrench set
Paragraph
Condition Description
Adjustable open end wrench
Parked on level surface;
Materials/Parts
parking brake applied; engine
Cleaning solvent
Item 1, Appendix C
off.
Clean cloths
Item 2, Appendix C
Engine oil
Item 24, Appendix C
STEP
LOCATION
ITEM
ACTION
REMARKS
OIL SAMPLING
1
Engine,
a. Engine
Warm up
Idle engine to obtain normal
left side
operating temperature
b. Container
Position
Under hose (5)
c. Hose (5)
Flush
Open valve (12) and drain one
pint of oil into container;
then close valve and remove
container
NOTE
Procure clean sample bottle and a copy of DD Form 2026 (Oil Analysis
Request) in accordance with local procedure.
d. Clean sample
a. Open
Remove bottle cap and place
bottle
on clean surface with edges
up
b. Position
Under hose (5)
c. Fill
Open valve (12) and fill
sample bottle to within 1/2
inch of top
d. Close
Install and tighten cap; wipe
oil from exterior
e. Package
Place bottle in plastic bag
e. Engine
Shut down
2-61
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |