|
|
TM 9-2320-285-24-1
2-12. ENGINE MAINTENANCE (CONT)
e. Dipstick and Tube (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
CLEANING
WARNING
Dry cleaning solvent (P-D-680), used to clean parts is toxic and
flammable. Wear protective goggles and gloves and use only in a well
ventilated area. Avoid contact with skin, eyes, and clothes and don't
breathe vapors. Do not use near open flame or excessive heat and don't
smoke when using it. Failure to do so could cause serious injury. If you
become dizzy while using cleaning solvent, get fresh air and medical
attention immediately. If contact with skin or clothes is made, flush with
large amounts of water. If contact with eyes is made, wash eyes with
water and seek medical aid immediately.
2
All parts
Clean
Use cleaning solvent P-D-680;
dry using clean cloths
INSPECTION
3
All parts
Inspect for
Replace if defects observed
cracks
damaged
threads
bent condition
INSTALLATION
4
Engine,
a.
Adapter (7)
Install
If removed
rear, right
b.
Tube (6)
Install
Screw into adapter (7)
side
c.
Tube clip (5)
Position
On tube (6)
d.
Capscrew (4),
Install
Secures tube clip (5) to
lock washer
bracket
(3) and nut
(2)
e. Dipstick (1)
Install and
Add oil as necessary (refer
check oil
to current lubrication
order)
f. Starter
Install
g. 70 ampere
Install
circuit break-
er and solenoid
2-60
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |