|
|
TM 9-2320-285-24-1
2-12. ENGINE MAINTENANCE (CONT)
d. External Oil Filter and Lines (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (cont)
33
Engine oil
a. Hose (34)
Route and
Between engine oil filter and
filter
connect
external oil filter housing
(20)
b. Elbow (33)
Connect and
To adapter (35)
tighten
34
External
Connector (32)
Connect and
To adapter (36)
oil filter
tighten
35
Engine bell
a. Two clamps (46)
Position
Clamps were installed on hose
housing,
(34) in step 32 above
lower side
b. Two lock wash-
Install and
Secures clamps to engine bell
ers (47) and
tighten
housing
capscrews (6)
36
Engine oil
a. Hose (31)
Route and
Between engine oil pan and
pan
connect
external oil filter housing
(20)
b. Connector (29)
Connect and
To 90 degree adapter (40)
tighten
37
External
a. Connector (30)
Connect and
To adapter (38)
oil filter
tighten
b. Drain cock (1)
Close tightly
38
Engine oil
Drain plug
Install and
pan
tighten
NOTE
Perform step 5 above to fill engine with oil.
39
Vehicle,
Rear platform
Install
rear
2-57
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |