|
|
TM 9-2320-270-20-3
DEFROSTER KNOB AND CABLE
This task covers:
a. Removal (page 4-1272)
b. Installation (page 4-1273)
INITIAL SETUP
Personnel Required
Tools
One
Pliers, slip-joint, straight-nose
Screwdriver, cross-tip, number 1
Screwdriver, flat-tip, 1/8-inch
Wrench, open-end, 5/8-inch
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
Using flat-tip screwdriver, unscrew
Setscrew (3)
1. Knob (1) to
part way.
cable (2)
Pull off.
Knob (1)
2. Cable (2)
Using 5/8-inch wrench, unscrew and take
Nut (5)
3. Cable (2) to heater
off.
control panel (4)
Pull out from behind.
Cable (2)
4. Dashboard (6)
Using slip-joint pliers, pull off.
Spring washer (8)
5. Cable (2) to de-
froster door arm (7)
Using cross-tip screwdriver, unscrew and
Screw (11)
6. Cable clip (9) to
take out.
cable support (10)
Pull up and off.
Cable clip (9)
7. Cable support (10)
Pull off and take out.
Defroster cable (2)
8. Defroster door
arm (7)
4-1272
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |