|
|
TM
9-2320-270-20-3
WINDSHIELD WASHER RESERVOIR
This task covers:
c. Assembly (page 4-1181)
a. Removal (page 4-1180)
d. Installation (page 4-1181)
b. Disassembly (page 4-1180)
--
INITIAL SETUP
Personnel Required
Tools
Two
Handle, ratchet head, 3/8-inch drive
Screwdriver, cross-tip, offset,
Equipment Condition
number 1
Socket, 3/8-inch, 3/8-inch drive
Left side of hood opened (TM 9-2320-270-10).
Materials/Parts
Lockwasher, reservoir to firewall
(two required)
Tag, marking (item 18, appendix C)
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
NOTE
Tag hoses according to general maintenance instructions (page 4-1).
Pull off.
Two hoses
1. Reservoir (1) and
(3) and (4)
cover (2)
Lift out.
Reservoir (1)
2. Bracket (5)
With help from assistant and using
a.
Three screws (7),
3. Bracket (5) to
screwdriver, 3/8-inch socket and
firewall (6)
nuts (8), lock-
handle, unscrew and take out.
washers (9), and
Get rid of Iockwashers (9).
b.
bracket (5)
DISASSEMBLY
Unscrew and take off.
Cap (10)
4. Reservoir (1)
a. Take out.
Cover and pump
5.
b. Get rid of fluid (page 4-1).
assembly (2)
4-1180
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |