|
|
TM9-2320-270-20-3
WINCH HYDRAULIC VALVES
This task covers:
Adjustment (page 4-1155)
INITIAL SETUP
Tools
Materials/Parts
Gage, multi-range pressure
Lockwashers, winch control panel
Screwdriver, flat-tip, 3/6-inch
(12 required)
Wrench, open-end, 1/2-inch
Wrench, open-end, 1 1/16-inch
Personnel Required
Wrench, open-end, 2-inch
One
ACTION
LOCATION
ITEM
REMARKS
ADJUSTMENT
12 screws (2),
1. Winch control
a. Using 1/2-inch wrench, unscrew and
panel (1)
Iockwashers (3),
take out.
and washers (4)
b. Get rid of Iockwashers (3).
2.
Front cover
Take off.
plate (5)
TA240721
4-1155
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |