|
|
TM9-2320-270-20-3
WINCH VALVES TO MOTORS HYDRAULIC LINES - CONTINUED
INSTALLATION CONTINUED
NOTE
FOLLOW-ON MAINTENANCE: Check operation (TM 9-2320-270-10).
TASK ENDS HERE
PUMP TO WINCH VALVES HYDRAULIC LINES
This task covers:
a. Removal (page 4-1150)
b. Installation (page 4-1152)
INITIAL SETUP
Materials/Parts
Tools
Hose plugs
Wrench,
open-end, 5/8-inch
Lockwasher, hose clamp (eight required)
Wrench,
open-end, 3/4-inch
Lockwashers, hose clamps (eight required)
Wrench,
open-end, 2-inch
Packing, preformed, hoses (two required)
Wrench,
open-end, 2 5/8-inch
Packing, preformed, hose (two required)
Wrench,
open-end, 2 7/8-inch
Tag, marking (item 18, appendix C)
Wrench,
pipe, 3-foot
Personnel Required
One
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
NOTE
Tag hoses according to general maintenance instructions (page 4-1).
Using pipe wrench, unscrew part way.
Two unions (2)
1. Two pipes (1)
Hose (4)
a. Using 2 7/8-inch wrench and 2 5/8 inch
2. Nipple (3)
wrench, unscrew and take off.
b. Plug hose (4).
4-1150
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |