|
|
TM9-2320-270-20-3
WINCH CABLE
This task covers:
a. Removal (page 4-1140)
b. Installation (page 4-1140)
INITIAL SETUP
Personnel Required
Tools
One
Wrench, open-end, 1 1/8-inch
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
WARNING
Leather gloves must be worn when handling cable to prevent cuts and scrapes. Never let
cable run through hands. Broken and frayed wires can cause injury.
Operate winch (TM 9-2320-270-10) and
Cable (2)
1. Winch drum (1)
unwind all cable from drum.
Using 1 1/8-inch wrench, unscrew and
a.
Two nuts (3) and
2.
take out.
U-bolt (4)
b.
Take off cable (2).
INSTALLATION
Put U-bolt (4) in holes and start nuts.
a.
Two nuts (3) and
3. Winch drum (1)
Put cable end under U-bolt (4).
b.
U-bolt (4)
Using 1 1/8-inch wrench, screw on and
c.
tighten.
WARNING
Leather gloves must be worn when handling cable to prevent cuts and scrapes. Never let
cable run through hands. Broken and frayed wires can cause injury.
Operate winch (TM 9-2320-270-10) and
Cable (2)
4.
wind cable onto drum.
4-1140
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |