|
|
TM 9-2320-270-20-3
LATCHES, LATCH MOUNTING BRACKETS, AND CATCHES
This task covers:
e. Inspection/Replacement (page 4-111 1).
a. Latch Removal (page 4-1108)
f. Catch Installation (page 4-1111)
b. Latch Mounting Bracket Removal
g. Latch Mounting Bracket Installation
c. Catch Removal (page 4-1110)
h. Latch installation (page 4-1113).
d. Cleaning (page 4-1111)
INITIAL SETUP
Materials/Parts
Tools
Lockwasher (as required)
Drill, electric, portable
Pin, cotter (as required)
Drill twist, 1 1/64-inch
Rivets (as required)
Hammer, machinist's ball-peen
Pliers, slip-joint
Personnel Required
Punch, drive pin, 3/16-inch
Riveter, hand
One
Wrench, open-end, 3/8-inch
Wrench, open-end, 1/2-inch
ACTION
ITEM
REMARKS
LOCATION
LATCH REMOVAL
NOTE
There are nine latches on this vehicle, Do steps 1 thru 7 to remove any latch.
Unlatch.
Latch (2)
1. Catch (1)
a. Using pliers, take out.
Cotter pin (4)
2. Pin (3)
b. Get rid of.
Take out.
Pin (3)
3. Latch (2) to
mount (5)
Take off.
Latch (2)
4. Mount (5)
a. Using hammer and drive pin punch,
Three rivets (7)
5. Mount (5) to
mark center.
hood (6)
b. Using electric drill and drill twist, drill
out.
Three rivets (7) and
a. Take out.
6.
b. Get rid of rivets (7).
collars (8)
4-1108
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |