FRONT FRONT PIN REMOVAL

TM 9-2320-270-20-3

FRONT SPRING PINS - CONTINUED

ACTION

ITEM

REMARKS

LOCATION

FRONT FRONT PIN REMOVAL

WARNING

Some parts are heavy. Be careful when handling them. Lifting equipment is needed

when parts weigh over 50 pounds (23 kg) for a single person lift, over 100 pounds

(45 kg) for a two person lift, and over 150 pounds (66 kg) for a three or more person

lift. Do not try to handle heavy parts without lifting equipment. Keep clear of heavy parts

supported only by lifting equipment. Failure to observe this precaution could cause

serious injury or death of personnel.

1. T r u c k

Frame (1)

a. Using lifting equipment, lift.

b. Place two trestles in position to

support so that there will be no load

on pins (2).

c. Using lifting equipment, lower onto two

trestles.

Lubrication

Using 7/16-inch wrench, unscrew and take

2. Shackle pin (2)

fitting (3)

out.

Lockpin (4), washer

a. Using 3/4-inch wrench, unscrew and

take off.

(5), and nut (6)

b. Using hammer and punch, drive out.

4. Bracket (7)

Using drift and hammer, drive out.

Shackle pin (2)

TA240672

4-1075