|
|
TM 9-2320-270-20-3
POWER STEERING PUMP SUPPLY HOSE
This task covers:
c. Inspection/Replacement (page 4-1014)
a. Removal (page 4-1012)
d. Installation (page 4-1014)
b. Cleaning (page 4-1014)
INITIAL SETUP
Materials/Parts
Tools
Fluid, power steering (LO 9-2320-270-1 2)
Brush, wire
Tape, teflon (item 22, appendix C)
Pan, drain
Wrap, tie (item 24, appendix C)
Pliers, diagonal cutting
Pliers, straight-nose
Personnel Required
Wrench, adjustable, 18-inch
Wrench, open-end, 9/16-inch
One
Wrench, open-end, 1 5/16-inch
Wrench, open-end, 17/16-inch
Equipment Condition
Wrench, open-end, 1 1/2-inch
Left side of hood open (TM 9-2320-270-10).
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
a.
Place drain pan underneath.
Drainplug (2)
1. Power steering
Using 9/16-inch wrench, unscrew and
b.
reservoir (1)
take out.
c.
Allow fluid to drain.
Using cutting pliers, cut and take off.
Tie wrap (6)
a.
2. Hoses (3), (4),
Get rid of.
b.
and (5)
Using 1 7/16-inch and 1 1/2-inch
a.
Hose (3)
3. Elbow (7)
wrenches, unscrew and take off.
b.
Turn hose (1) down into drain pan and
allow fluid to drain.
Get rid of fluid (page 4-1).
c.
4-1012
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |