|
|
TM 9-2320-270-20-3
BATTERY BOX BRACKET TO BOOSTER HOSES
This task covers:
c. Inspection/Replacement (page 4-1006)
a. Removal (page 4-1004)
d. Installation (page 4-1006)
b. Cleaning (page 4-1006)
INITIAL SETUP
Materials/Parts Continued
Tools
Lockwasher, bulkhead fitting to
Brush, wire
battery box bracket
Pliers, straight-nose, round
Packing, preformed, adapter to power
Pan, drain
steering booster
Wrench, open-end, 9/16-inch
Wrench, open-end, 7/8-inch
Personnel Required
(two required)
Wrench, open-end, 15/16-inch
One
Wrench, open-end, 1-inch
(two required)
Equipment Condition
Materials/Parts
Left side of hood opened
(TM 9-2320-270-10).
Fluid, power steering
(LO 9-2320-270-12)
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
NOTE
Steps in this task apply to battery box bracket to power steering booster pressure and
return hoses. Pressure hose is shown.
a.
Place drain pan underneath.
Drainplug (2)
1.
Power steering
b.
Using 9/16-inch wrench, unscrew and
reservoir (1)
take out.
..
C
Allow fluid to drain and get rid of
fluid (page 4-1).
a.
Using wire brush, clean dirt from
Pressure hose (4)
2. Adapter(3)
around adapter (3).
b.
Put drain pan underneath.
c.
Using two 7/8-inch wrenches, unscrew
and take off.
d.
Allow fluid to drain and get rid of
fluid (page 4-1).
4-1004
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |