|
|
TM9-2320-270-20-3
PITMAN ARM TO BOOSTER DRAG LINK - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ADJUSTMENT
NOTE
Looseness between drag link and pitman arm can be taken up by adjustment. If loose-
ness cannot be taken out by adjustment, go to removal.
4.
Drag link (2) to
Cotter pin (6)
a.
Using pliers, take out.
spring seat plug (5)
b.
Get rid of.
5.
Drag link (2)
Spring seat plug (5)
a.
Using screwdriver bit and handle,
tighten.
b.
Back off just enough so slot lines
up with cotter pin holes.
6.
Drag link (2) to
New cotter pin (6)
a.
Put in.
spring seat plug (5)
b.
Note if spring seat plug is screwed in
so far that cotter pin (6) misses
slot.
If cotter pin is above slot,
repair drag link.
c.
Using pliers, spread and bend back.
TA240609
4-963
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |