|
|
TM9-2320-270-20-3
DASH BRACE- CONTINUED
ACTION
REMARKS
ITEM
LOCATION
REMOVALCONTINUED
a. Using 1/2-inch box wrench, 1/2-inch
Two capscrews (3),
17. Steering column
socket, and handle, unscrew and take
nuts (4), and lock-
bracket brace (1)
out.
washers (5)
to dash brace (2)
b. Get rid of Iockwashers (5).
Lower and rest on front seat.
Steering column (6)
18.
a. With help of assistant, using 1/2-inch
Two capscrews (8),
19. Dash brace (2)
12 washers (9),
box wrench, 1/2-inch socket, and
to firewall (7)
handle, unscrew and take out.
two Iockwashers
(10), and nuts (11)
b. Get rid of Iockwashers (10).
Two capscrews (1 3),
a. Using 1/2-inch box wrench, 1/2-inch
20. Dash brace (2)
nuts (14), washers
socket, and handle, unscrew and take
to dashboard (12)
(15), and lock-
out.
washers (16)
b. Get rid of Iockwashers (16).
Dash brace (2)
Take out.
21.
DISASSEMBLY
a. Using cross-tip screwdriver, 3/8-inch
Screw (18), nut
22. Turn signal flasher
(19), Iockwasher
socket, and handle, unscrew and take
holder (17) to dash
(20), and turn signal
off.
brace (2)
flasher holder (17)
b. Get rid of Iockwasher (20).
ASSEMBLY
Put in place.
Turn signal flasher
23. Dash brace (2)
holder (17)
Screw (18), new
Screw in and tighten using cross-tip screw
24. Turn signal flasher
Iockwasher (20),
driver, 3/8-inch socket, and handle.
holder (17) to dash
and nut (19)
brace (2)
INSTALLATION
Put through hole in center.
Air lines 533 (21),
25. Dash brace (2)
27 (22), and 663 (23)
Dash brace (2)
Place in postion.
26.
4-948
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |