 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM9-2320-270-20-2
TANDEM AXLE HUB, DRUM, AND BEARING ASSEMBLY- CONTINUED
ACTION
LOCATION
ITEM
REMARKS
40.
Hub (6)
Rotate to make sure it is not binding.
If it is binding, take off locknut
and Iockwasher and repeat steps
38 to 40.
41. Spindle (5)
Using slip-joint pliers, bend down.
Lockwasher (9)
42.
New seal (11)
Using ball-peen hammer and woodblock,
tap in.
43. Slack adjuster (12)
a.
Using 9/16-inch socket, push down
Adjusting screw (13)
spring loaded bushing (14) and screw
in until tight.
Turn counterclockwise two or three
b.
clicks.
c.
Hit brakedrum (1) with end of handle
to check for proper clearance. Drum
(1) should ring.
If it does not ring, back off adjust-
ing screw move and check again.
d.
Remove trestles.
TA240594
4-935
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals