|
|
TM 9-2320-270-20-2
TRACTOR PROTECTION VALVE BRACKET
This task covers:
c. Inspection/Replacement (page 4-890)
a. Removal (page 4-888)
d. Installation (page 4-890)
b. Cleaning (page 4-890)
INITIAL SETUP
Materials/Parts Continued
Tools
Lockwasher, intervehicular wiring harness
Extension, 3-inch, 3/8-inch drive
receptacle and cover to tractor protection
Handle, ratchet, 3/8-inch drive
valve bracket (four required)
Socket, 7/16-inch, 3/8-inch drive
Lockwasher, tractor protection valve bracket
Socket, 1/2-inch, 3/8-inch drive
to frame (two required)
Socket, 3/4-inch, 3/8-inch drive
Lockwasher, tractor protection valve to
Wrench, box, 7/16-inch
tractor protection valve bracket (two
Wrench, box, 1/2-inch
required)
Wrench, box, 3/4-inch
Personnel Required
Materials/Parts
One
Lockwasher, loop clamp and ground
wires to tractor protection valve
bracket (two required)
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
a. Using 1/2-inch wrench, 1/2-inch
Two screws (3),
1. Tractor protection
socket, and handle, unscrew and take
nuts (4), and
valve (1) to
Iockwashers (5)
out.
bracket (2)
b. Get rid of Iockwashers (5).
a. Using 7/16-inch box wrench, 7/16-inch
Two screws (8),
2. Intervehicular
socket, extension, and handle, unscrew
nuts (9), and
wiring harness
Iockwashers (10)
and take out.
cover (6) and
b. Get rid of Iockwashers (10).
quick release
valve bracket (7)
to bracket (2)
4-888
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |