INTERAXLE DIFFERENTIAL AND TRANSFER CASE LOCKUP VALVE

TM9-2320-270-20-2

INTERAXLE DIFFERENTIAL AND TRANSFER CASE LOCKUP VALVE

This task covers:

d. Inspection/Replacement (page 4-772)

a. Removal (page 4-770)

e. Assembly (page 4-773)

b. Disassembly (page 4-772)

f. Installation (page 4-774)

c. . Cleaning (page 4-772)

INITIAL SETUP

Materials/Parts

Tools

Soap, liquid (item 14, appendix C)

Hammer, plastic

Tag, marking (item 18, appendix C)

Key, socket-head screw, 3/16-inch

Tape, teflon (item 22, appendix C)

Pliers, long-nose, round

Screwdriver, cross-tip, offset,

Personnel Required

number two

Vise

One

Wrench, open-end, 9/16-inch

Wrench, open-end, 5/8-inch

Equipment Condition

Wrench, pipe

Instrument panel open (page 4-244).

ACTION

REMARKS

ITEM

LOCATION

REMOVAL

WARNING

Make sure all pressure is drained from air system before disconnecting air lines. Parts

under pressure can, when removed, fly off with great force causing injury to personnel.

NOTE

Tag air lines according to general maintenance instructions (page 4-1).

Drain (TM 9-2320-270-10).

Air system

Using 5/8-inch wrench, unscrew and pull

Nut (3)

2. Air line 72 (1) to

back.

elbow (2)

Pull out.

Air line 72(1)

3. Elbow (2)

Using long-nose pliers, pull out.

Insert (4)

4. Air line 72 (1) or

elbow (2)

4-770