AXLE LIFT KIT PRESSURE PROTECTION VALVE AND MANIFOLD

TM 9-2320-270-20-2

AXLE LIFT KIT PRESSURE PROTECTION VALVE AND MANIFOLD

This task covers:

d. Inspection/Replacement (page 4-739)

a. Removal (page 4-736)

e. Assembly (page 4-740)

b. Disassembly (page 4-738)

f. Installation (page 4-740)

c. Cleaning (page 4-739)

INITIAL SETUP

Materials/Parts

Tools

Lockwasher, air manifold to cross member

Hammer, plastic

(two required)

Handle, ratchet, 3/8-inch drive

Plugs, shipping

Pliers, diagonal-cutting

Soap, liquid (item 14, appendix C)

Pliers, long-nose, round

Tag, marking (item 18, appendix C)

Pliers, slip-joint, straight-nose

Tape, teflon (item 22, appendix C)

Socket, 7/16-inch, 3/8-inch drive

Wrap, tie (item 24, appendix C)

Vise

Wrench, box, 7/16-inch

Personnel Required

Wrench, open-end, 5/8-inch

Wrench, open-end, 13/16-inch

One

Wrench, open-end, 7/8-inch

Wrench, open-end, 15/16-inch

Wrench, pipe, 1/4- to l-inch

ACTION

ITEM

REMARKS

LOCATION

REMOVAL

WARNING

Make sure all pressure is drained from air system before disconnecting air lines. Parts

under pressure can, when removed, fly off with great force causing injury to personnel.

NOTE

Tag air lines according to general maintenance instructions (page 4-1).

Air system

Drain (TM 9-2320-270-10).

a. Using cutting pliers, cut and take off.

Tie wrap (3)

2. Elbow (1) and air

b. Get rid of.

line (2)

Using 5/8-inch wrench, unscrew and pull

Air line 244 (4)

3. Elbow (1)

back.

Using long-nose pliers, pull out.

Insert (5)

4. Air line 244 (4)

or elbow (1)

4-736